[UPDATE: Camera setup details and live image] Here’s the CAD render of the OnePlus 9

by RPRNA Group

[UPDATE]

After the CAD render of the OnePlus 9, 91Mobiles now brings the camera setup details and a live image. In the image below, you can see a triple camera setup at the back.

As reported, the OnePlus 9 has a 48MP main camera sensor with 12MP output and 6mm focal length, but it won’t be Sony IMX586 sensor, which could come with IMX689.

It will sport a 48MP ultra-wide-angle sensor, up from the OnePlus 8T 16MP lens. There’s no information regarding the third camera sensor.

 

[ORIGINAL ARTICLE: NOVEMBER 15, 2020]

We are continuously hearing leaks and rumors about the upcoming OnePlus 9. Now we have a CAD render of the OnePlus 9.

According to these new CAD renders (below) from 91mobiles, it has a familiar design to the OnePlus 8T, a flat OLED display with a punch-hole front camera.

At the back, it will have a triple-rear camera setup, two big camera lens and one with a small lens – which could be a depth sensor.

As per the rumors, it has a 6.65-inch display with a 120Hz refresh rate, 5nm Snapdragon 875 with 5G connectivity.  In addition, it is expected to come with the OnePlus’ Warp Charge 65.

[JOIN ONEPLUS ON TELEGRAM]

There’s no information about the OnePlus 9 Pro, likely to feature stronger specs than the OnePlus 9. OnePlus is expected to release the OnePlus 9 series in March 2021.

Related Posts

Leave a Comment