A few months before the release of the new iPhone 13, YouTube blogger has managed to get an iPhone 13 Pro Max model. Models often appear before the release of new iPhone models in order to let case accessory manufacturers know what to expect. Although this model is earlier than usual, it seems to be consistent with the rumors we have heard so far.
The iPhone 13 Pro Max model shows that it is equipped with a 6.7-inch display, and the design is very realistic, and the quality is higher than most models. In terms of design, the iPhone 13 Pro Max model looks similar to the iPhone 12 Pro Max, but there is an obvious change in the notch.
Consistent with the rumors, the notch has been reduced, the width has also become narrower, and the four components of the TrueDepth camera system are positioned closer to each other. The speaker was relocated above the TrueDepth camera system, rather than in the middle, which is also the main reason for the smaller notch.
The model has three rear camera lenses, which are larger than the current iPhone 12 Pro Max camera lens, perhaps because the rumored ultra-wide-angle lens has added a sensor-shift optical image stabilization function, which will be the same as in 2020. The sensor displacement stabilization function of the wide-angle lens is the same.
The camera of the new iPhone has a larger protrusion to accommodate a larger lens. The lens itself is flush with each camera protrusion, protruding from each camera module as we saw in the iPhone 12 Pro Max. This is a slight adjustment compared to a little bit of the situation.
The position of the volume and mute buttons or the power button has not changed, and there is a clear Lightning interface. The model seems to be thicker than the iPhone 12 Pro Max, but the difference is small. Judging from the model, the width of the iPhone 13 Pro Max may only be slightly narrower.